Acoustic Audio by Goldwood HT-55 Flush Mount 5 Speaker Set and Powered SubwooferCenter Channel with Front and Rear, Right and Left home theater configurationTraditional Passive speaker design, drive power from your home audio receiver3 Pcs of IW191 In Wall Wired Speakers5.25" High Rigidity Polypropylene cone woofers and 12mm soft dome tweetersFrequency response is 40Hz-22 kHz with 97dB at 8ohmFits hole size of 6.25" x 9.5" with 3" depth and Spring Loaded raw wire connections2 Pcs of R191 In Ceiling Wired Speakers5.25" High Rigidity Polypropylene cone woofers and 12mm soft dome tweetersFrequency response is 45Hz-22 kHz with 95dB at 8ohmFits hole size of 6.625" with 3" depth and raw wire clamp or solder connectionsPressure Lock Mounting System clamps tight to drywall with No Hardware NeededDurable ABS Housings and Removeable Grills are paintableAcoustic Audio PSW10 Home Theater Powered SubwooferRCA inputs easily connect to your home theater receivers dedicated Sub OutIntegrated High Efficiency Power Amplifier with 400 watts peak powerFrequency response of 25 - 250 Hz with 97dB at 8ohm10" Down Firing long throw woofer with high rigidity PVA Treated coneStanding sub with feet size is (H x W x D) 12.4" × 11.4" × 12.4"This Powered Subwoofer is NOT LFE CompatibleSystem RequirementsAny home audio receiver or amplifier with raw speaker wire outputs and Sub OutYour receiver power should be no less than 10 and no more than 200 watts per channelCL3 Rated in wall certified raw speaker wire to connect your receiver to the speakersApplicationsHome Theater Surround Sound SystemsWhole House Audio SystemsWhat's in the boxes5 Flush Mount Passive Speakers with Removeable Grills and Cut-Out Templates1 Powered Subwoofer with RCA CableInstruction Manuals
FLUSH MOUNT IN WALL 5 SPEAKER SET AND POWERED SUB - Center channel with front and rear, right and left home theater configuration easily integrate with new and existing audio systems, passive speaker design, simply drive power from your home audio receiver
5 FLUSH MOUNT SPEAKERS - 3 In Wall and 2 In Ceiling with 5.25" High Rigidity Polypropylene cone woofers with butyl rubber surrounds, 12mm soft dome tweeters, 40 and 45Hz-22 kHz with 97 and 95dB at 8ohm, pressure lock mounting system clamps tight to drywall with No Hardware Needed
PSW10 POWERED SUBWOOFER - RCA inputs easily connect to your home theater receivers dedicated Sub Out, integrated power amplifier with 400 watts peak power, 25 - 250 Hz with 97dB at 8ohm, 10" down firing long throw woofer with high rigidity PVA treated cone, NOT LFE Compatible
SYSTEM REQUIREMENTS - Any home audio receiver with raw speaker wire outputs, power from your receiver should be no less than 10 and no more than 200 watts per channel, dedicated Sub Out, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers
WHAT'S IN THE BOXES - 1 Acoustic Audio by Goldwood HT-55 speaker set, 1 PSW10 powered sub with cable, removeable grills, cut-out templates, instruction manual. Use for home theater surround sound
