Antenna Pole Mount for Outdoor, Upgraded 14 Inch Antenna Mast Pole with Double U-Bolts - Universal Mount Pole for Home Outside Antennas/Phone Signal Booster, Easy Installation Antenna Mounting Pole
Product Description
Mounting Pole for Outdoor Antennas
This Antenna Mount Pole is 14" length, 1. 5" in diameter, can be applied to building roof or wall. Made of sturdy aluminum alloy material, corrosion-resistant, anti-rust, not easy to deform or break. The installation is stable, perfect for outdoor use.
The mount bracket is to be installed on a flat surface via screws, then the pole can be attached to the bracket with the pipe bracket. When mounted correctly the pole will be upright, in the optimal position for a outdoor antenna to be mounted to the pole.
Widely Application Mount Pole for Various Types of Antenna
|
|
|
|
|---|---|---|
|
|
|
|
Installation Steps
1 - Attach Wall Mounting Bracket to a flat surface or wall with screws in the 5 provided holes of the bracket.
2 - Place Pipe Bracket onto the U-Bolt with the U-shapes from both parts facing each other to create a circle.
3 - With the Pipe Bracket and U-Bolt assembly in hand place the Pole Mounting Bracket next to the Pipe Bracket.
4 - Put the split washers over the end of U-Bolt threads.
5 -Place the Nuts over the U-Bolt threads and tighten slightly to make sure none of the previously assembled components fall off the U-Bolt.
6 - Place the Pipe in between the Pipe Bracket and the U-Bolt and set at desired height and tighten nuts to secure the pipe in place.
Antenna Pole is made of aluminum alloy material, can be applied to building roof or wall.
The occlusion of trees easily affects the signal reception, it is recommended that you can install the pole in an open location, which will better help your antenna to receive the signal.
Package Contents
1X Antenna Pole
2X U-Bolt
2X Pipe Bracket
1X Wall Mounting Bracket
4X Split Washers
4X Nuts