BDF 1PFR Window Film Frosted Privacy Static Cling Non-Adhesive (Opaque) - 36in X 14ft
Product Description
Excellent All Day Long Privacy
Reduces glare and preserves the quality of carpets and furnishings while still allowing natural light to enter. Buy Decorative Film's Frost Static Cling Decorative Window Film is our newest addition and one of our biggest strengths. It is the very basic form of our Matte series. Whereas the Matte series provide a frosted glass look in color, the Frost Static Cling film provides a clear frosted glass appearance whose frostiness blurs the background and ensures privacy.
- Reduces glare and preserves the interior
- Provides 24/7 privacy
- Do not block the sunlight and keep it bright
Non-Adhesive Static Cling Film
Static Cling Decorative Window Films use different application methods to make the process a lot easier than traditional ways of film installation. The film has no adhesives, so all you do is apply water, stick the film on the window, squeegee the water out, and enjoy your new design. Easy and practical, the Static Cling Window Films are rising on the market as the new popular kind of window film that has enabled DIY even more accessible. Removal is as simple as installation.
FREE TOOLS AND EASY INSTALLATION GUIDE to make installation DIY-friendly. Make sure window surface is completely clean and absolutely free of any blemishes.
- Non-adhesive Static cling film
- Super easy uninstallation process
- Can be removed very easily
- Tools are included in the package
|
|
|
|
|
|---|---|---|---|
|
It is best to clean the window with a window scraper before any installation. Using the window scraper and soapy solution all over the window will clean it of any caked-on dirt that wiping will not remove. You can use the installation solution to also clean the window as well as any non-ammonia-based cleaners. It is recommended to clean the surrounding area of the glass, like the frame and seals before installation too. Using a no lint or low lint cloth will ensure the glass will be free of any dust. |
Attach one piece of tape to a corner of the film. Then use another tape of the other side of the same corner. Both tapes should be placed slightly offset. Hold onto the two over hanging tapes and press them together to grab the film’s corner tip firmly. Then slowly separate the two pieces of tape; the liner and film should separate. As you gently pull the liner away, spray the exposed adhesive side with the installation solution. This will prevent the film from sticking to itself or to any thing else. |
Spray, spray, and spray more! You need to spray a lot and make the film fully wet and almost flooded on the film and the window glass surface. Please remember that the fully wet window and the film is one of the key factors for your successful installation without bubbles. To handle the film easier when separating the film and the liner, spraying soapy water liberally on the exposed adhesive side remove the liner This will eliminating potential wrinkles and bubbles during or after installation. |
The static cling film doesn't have the adhesive and can be removed by hand. Other installed adhesive window film can be removed even after years. You need to soften the cured or hardened adhesive of the film to remove the film. A fabric steamer or a heat gun can heat up the film and loosen the adhesive. Using a hairdryer can heat up the film to loosen the adhesive, but it will take longer. If there is remaining adhesive residue, it can be removed with soapy water and a razor blade. |
