BETWEETH Dental Floss Holder 2.0, Interdental Flosser, Reusable Handle, Tension Adjustable with Preloaded Floss 27 yd / 25 m Refillable
Product Description
ALWAYS USE NEW SECTION OF FLOSS
Simply turn the spinning reel to reload new section of floss. Using new section for each tooth can increase the effectiveness of flossing.
Step 1
Turn the wheel flange clockwise 3-4 times to load new section of string and floss the teeth. Use fresh section of floss as often as necessary, until there is too much old floss around the reel.
Step 2
Slightly turn and reverse the wheel flange (without passing the clicking sound) to loosen the floss. Squeeze the tines to take off the floss.
Step 3
- DO NOT turn the wheel flange when the new floss is not pulled with strength, or it will be drawn back to the inner reel and becomes hard to pull out. Cut the string and detach the wheel flange to remove the old floss.
- Place the wheel flange back on the reel. Pull the floss tight while turning the wheel flange clockwise to draw out enough length of new string.
Step 4
Remove the wheel flange, string the floss along the groove and go through the open slit on the reel core. Wrap the floss around the reel three times and then go through the slit again. Attach the wheel flange and cut off the extra floss.
In the case the floss breaks
|
|
|
|
|
|---|---|---|---|
STOP turning the wheelSTOP turning the wheel! Or the floss on the left tine would be drawn back to the inner reel and becomes hard to pull out. |
Remove the broken flossDetach the reel flange, and remove the broken floss from the reel. |
Draw out new flossPull the floss tight while turning the wheel flange clockwise to draw out enough length of new string. |
String the flossRemove the wheel flange, string the floss along the groove and go through the open slit on the reel core. Wrap the floss around the reel three times and then go through the slit again. Attach the wheel flange and cut off the extra floss. |
