Specification: Item Type: Diagnostic Tool Material: Plastic Description: This diagnostic tool for Opel cars covers almost all Models, even new cars with CAN-BUS based diagnostic. Such as diagnostic function for Vectra-C, for Astra-H, for Zafira-B etc. It lets you read and clear fault codes, support many control units. This tool Can OBD2 for Opel Firmware V1.99 with PIC18F458 Chip. Attention for Latest Software VAUX-COM_120309a.exe: 1. If you run it for Windows XP or for Win7, please make sure you install dotnetfx35_SP1 system patch, or Opcom software can't perform well 2. When you install on for Win7 and open software, please choose Run as administrator, and read the installation video on CD carefully Function: 1. It covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic, such as for Vectra-C, for Astra-H, for Zafira-B etc. 2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test. 3. The program supports many control units, like Engine, Automatic Transmission, ABS, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples. 4. Since many pins used in the OBD connector for Opel, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000) 5. Fault codes will be shown with all available information. You can also run output tests on many controllers: PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps Package List: 1 x Diagnostic Cable1 x Power Cord 1 x CD
Professional diagnostic tool: This is a special PC-based diagnostic interface, dedicated to OPEL. Almost all models of the brand are covered, even new cars based on CAN-BUS diagnosis, such as Vectra-C, Astra-H, Zafira-B , etc.
Professional diagnostic tool: This is a special PC-based diagnostic interface, dedicated to OPEL. Almost all models of the brand are covered, even new cars based on CAN-BUS diagnosis, such as Vectra-C, Astra-H, Zafira-B , etc.
Perfect compatibility: The program supports a variety of control units, such as engine, automatic transmission, ABS, engine cooling module, instrument panel, electronic climate control, body control unit, etc.
Function: The program can read and clear fault codes, display real-time data, and perform output tests. You can print, save or copy the fault code to any other application. From the fault code window, you can directly enter the measurement block window. The program shows you the measurement block information of many control modules, which you can choose from the list.
Plastic: The product is made of plastic material, which has good elasticity, light weight, high strength, and is not easy to break. It is a good insulator, chemically stable, will not rust, good impact resistance, good transparency and abrasion resistance
Warm reminder: If it is XP or Win7, please make sure that the dotnetfx3_SP1 system cannot be repaired and other Opcom software is running normally; when installing Win7 and opening the software, please choose to run as an administrator and read the installation video on the CD carefully.
