MOOKEERF Antenna Pole Mount 12" Outdoor Antenna Mounting Pole for Outside Antenna(Signal Booster Antenna,Yagi Antenna,4G LTE Antenna,Lora Antenna,ect.)
Antenna Mounting Pole for Outdoor This Antenna Pole Mount is 12" in length ,1.96" in diameter, which is meant for outdoor use and can be applied to building roof or wall.(Please Note:The occlusion of trees easily affects the signal reception, it is recommended that you can install the pole in an open location, which will better help your antenna to receive the signal.) Well Made,Holds Firm Made of sturdy Q235 steel, the base plate is thick and very solid ,so is the arm ,which is strong enough to withstand high wind or heavy rains. An Easy to Install Pole Mount Came with all the fittings you need,the installation of it is simple enough, the mount bracket is to be installed on a flat surface via screws, then the pole can be attached to the bracket with the pipe bracket. Mounting Steps: 1 - Attach Wall Mounting Bracket to a flat surface or wall with screws in the 4 provided holes of the bracket. 2 - Place Pipe Bracket onto the U-Bolt with the U-shapes from both parts facing each other to create a circle. 3 - With the Pipe Bracket and U-Bolt assembly in hand place the Pole Mounting Bracket next to the Pipe Bracket. 4 - Put the split washers over the end of U-Bolt threads. 5 -Place the Nuts over the U-Bolt threads and tighten slightly to make sure none of the previously assembled components fall off the U-Bolt. 6 - Place the Pipe in between the Pipe Bracket and the U-Bolt and set at desired height and tighten nuts to secure the pipe in place. Package Include: Antenna Mount Pole*1 Wall Mounting Bracket*1 U-Bracket*1 Pipe Bracket*1 Screws*4
【Perfect Size】This Antenna Pole Mount is 12" in length and 1.96" in diameter, which is meant for outdoor use and can be applied to building roof or wall.
【Strong & Sturdy】 Made of sturdy Q235 steel.Designed especially for outdoor use,the MOOKEERF Antenna Pole Mount Accessory can be placed anywhere,from your roof to a wall,without fear of being knocked down by inclement weather.
【Easy Installation】The installation of this mount pole is simple,the wall mount bracket is to be installed on a flat surface via screws,then the pole can be attached to the bracket with the pipe bracket.
【Package Include】The antenna mount assembly accessories include Pole, U-Bolt,Pipe Bracket,Wall Mounting Bracket,Split Washers,Nuts.If you are not satisfied with any product,please don’t hesitate to contact us,we will serve you our best.
【Widely Usage】Sturdy and weatherproof pole helps with a fixation for most kinds of outdoor antennas in a convenient but practical way,it fits and works well with most types of Lora,Yagi,Omni or Panel antennas which need to be mounted outside on the roof or wall.
