Submitted by CardBoardBoxProcessr t3_11z1rsm in DIY
grilledstuffed t1_jdaqbag wrote
Not an electrician, but: My understanding that the updated NEC only requires arc fault breakers for 20/15 amp outlets in bedrooms.
I can't imagine too many breaker manufactures have rolled them out for anything that isn't required by code.
Your best bet is probably a 240/60amp GFCI.
Also, as /u/topcat5 said, the proper conduit installed according to local code is the best option to prevent wires being chewed.
Adam2013 t1_jdayuw7 wrote
>My understanding that the updated NEC only requires arc fault breakers for 20/15 amp outlets in bedrooms.
........ No.
Re-read the NEC if you're going to cite it.
grilledstuffed t1_jdb1ori wrote
My bad, it's been a while since I had to re-do any electrical work involving a panel, and the summery page I was on was outdated.
Still, I'm not seeing 240v 50a breakers on either of the big box stores.
Viewing a single comment thread. View all comments