Viewing a single comment thread. View all comments

DotAccomplished5484 t1_ixvjs3m wrote

Reply to comment by xrr88x in Help. Ring doorbell and existing chime by xrr88x

There should be two very thin wires attached to the doorbell that make a connection when the door bell is pushed. That is what activates the doorbell. They should be approx. 20v. Connect the two wires by touching with a piece of wire that still has the sheathing everywhere but the ends.

3

xrr88x OP t1_ixvlcl4 wrote

Thanks for the help I’m going to get the jumper and the chime just in case the jump doesn’t work and return the unused stuff.

1