DrMcMeow

DrMcMeow OP t1_j9wfvws wrote

https://i.imgur.com/4XDUj4q.png

Photographer Ethan Eisenhaur recently captured this incredible photo of a Maine lynx using a trail camera.

The picture was taken using a DSLR camera trap set up in the western mountains of the state, Eisenhaur said. The camera functions similarly to a game camera and takes a series of pictures when movement is detected.

He shared the picture on Facebook Friday.

Lynx are known to be elusive and fewer than 1,000 are believed to live in Maine, according to the state department of Inland Wildlife and Fisheries.

Eisenhaur grew up in Maine’s western mountains, according to a bio on his website.

“I have always enjoyed spending as much time as I can in the wilderness,” his website states.

https://web.archive.org/web/20230225011231/https://www.bangordailynews.com/2023/02/24/outdoors/photographer-captures-stunning-maine-lynx/

7

DrMcMeow OP t1_j8zdaen wrote

Many Mainers are concerned after seeing "dirty rain" hit the state on Friday.

Thankfully, the phenomenon is likely being caused by a dust storm from Texas and Oklahoma.

Maine DEP Division Director Andrew Johnson says tests have shown that vinyl chloride is not present in the lower region of Maine's atmosphere.

"We are not seeing anything that suggests that we had any impacts," Johnson said. "There could have been particulate material that came down with precipitation, but the window for that would have already come and gone."

https://web.archive.org/web/20230218011059/https://wgme.com/news/local/dirty-rain-department-environmental-protection-maine-affected-ohio-train-disaster-east-palestine-derailment-texas-oklahoma

25

DrMcMeow OP t1_j6pf9fa wrote

Maine utility regulators on Tuesday gave final approval to a wind power project that would provide enough electricity for at least 450,000 New England homes along with construction of a new transmission corridor in northern Maine to get the electricity to the regional power grid.

The share for Maine ratepayers would be $1 billion, or $1 per month for the average consumer over the first 10 years of the contract. Massachusetts in December said it would pay a portion over 20 years by procuring 40 percent of the project’s generation and transmission.

The Maine Public Utilities Commission had to determine by law that the project and costs are in the public interest, and the three commissioners agreed that they are on Tuesday.

The Legislature still needs to approve the project, a condition required by the 2021 referendum for projects with high-voltage transmission lines. Both projects also must win permits from the commission and other state and federal agencies, including land-use permits from the Department of Environmental Protection.

The project is the biggest part of the new Northern Maine Renewable Energy Development Program, which passed as part of a 2021 state law aimed at bringing clean power and jobs to Aroostook. In October, LS Power Base of New York won the transmission portion of the bid and Longroad Energy’s King Pine Wind of Massachusetts won the power generation bid.

The Aroostook project would carry output from a 1,000-megawatt wind power facility. The cost of the transmission line is about $2.8 billion, although the wind power project is expected to provide a savings of $1.08 billion. That would bring the project’s net cost to $1.8 billion over 20 years.

https://web.archive.org/web/20230131212549/https://www.bangordailynews.com/2023/01/31/business/maine-ratepayers-aroostook-wind/

5

DrMcMeow OP t1_j61th0h wrote

The University of Maine printed the first prototype in their on-campus facility in 2022.

Now they will be partnering with community action agency, Penquis

Penquis is receiving $3.3 million to support the project to build the first bio-based 3D printed neighborhood.

Penquis President and CEO, Kara Hay is thrilled with the partnership.

“We’re really excited! We know that in Maine we have a housing crisis both with affordability and access. We need solutions that are innovative and that can be affordable and quick,” said Hay.

The project is a joint effort in association with UMaine, MaineHousing, Maine’s congressional delegation, and the Key Bank Foundation.

The 3D printed homes are printed with materials such as wood residuals and bio-resin.

With the amount of materials in Maine, this neighborhood could be just the beginning of many more.

Dr. Habib Dagher, the founding executive director of the University of Maine Advanced Structures and Composites Center, said: “The goal is to make money 50% wood and 50% bio-resin. You may ask me, ‘Is there enough of these wood residuals in Maine to build homes?’ We did a survey, and we have about a million tons of what residuals every year in our region. A 600 square foot home, which is what we printed uses, 10 tons of of that material. So, you take a million tons divided by 10 tons every year, we have enough material to produce 100,000, 600 square foot homes.”

The creation of this neighborhood will also help UMaine polish-up the printing, shipping, and assembling process that goes into taking scraps of wood, and making them into complete home.

This will also be the path of the school’s Factory of the Future, where the houses will be built.

It will be a first-of-its-kind research and learning facility that will usher-in the future of digital manufacturing in true Dirigo spirit.

Hay added: “There’s something that happens around innovation, where even for those who have stigma against people that are struggling financially, the conversation the narrative changes when you pair innovation with the work. So one of the things we’re really excited about is being able to address stigma more directly.”

https://web.archive.org/web/20230127023758/https://www.wabi.tv/2023/01/26/3d-home-neighborhood-be-built-bangor/

15