pabloescobyte t1_iugb7in wrote on October 31, 2022 at 2:31 AM

Reply to icy ortho by MONEYINTHEMATTRESS

How does it feel to type on this for extended periods of time? Any issues you've run into?

pabloescobyte t1_iugb318 wrote on October 31, 2022 at 2:30 AM

Reply to Finally finished my first board, specs in comments by Velosteraptor23

Great job and welcome to the rabbit hole!

At first glance your spacebar and Esc looked like they didn't have keycaps on due to the way their prints kind of meld into the deskmat.

pabloescobyte t1_iugaued wrote on October 31, 2022 at 2:29 AM

Reply to Keep a look out for wild Oni on Halloween ;) by a_saker

Oni has a really nice set of blues. Normally I don't like light blue color schemes but this one just works so nicely together with the deeper blues and the high contasting white legends.

Nice to see someone using Holy Pandas for a change!

pabloescobyte t1_iugamjy wrote on October 31, 2022 at 2:27 AM

Reply to SA Tatooine with a 3D printed case by MightyJabba

Would probably look right at home inside a landspeeder or inside the Mos Eisley Cantina even!

I love the novelties but personally not a fan of the color scheme.

pabloescobyte t1_iugadmm wrote on October 31, 2022 at 2:25 AM

Reply to My office use southpaw mechanical keyboard - update by amuro_rei

This is awesome to see in an office instead of someone's desk.

Does your country drive on the left side of the road by any chance?

pabloescobyte t1_iudy9bd wrote on October 30, 2022 at 4:34 PM

Reply to 3d printed as much of my first keyboard as I could. Even tried sequential prints for caps with a 9/16 success rate! Grey is pla, orange is pla+. Cherry MX Reds, Knockoff pro micro w/ qmk, 128x64 oled, XDA keycaps with a single G20 for fun. Design by Joe Scotto, ScottoGame on github by CodeMonkeyZero

Keycaps look like they belong in Factorio lol. Some of the keycaps look mighty wobbly though... is that due to the material used or is it the switches?

pabloescobyte t1_iudy56g wrote on October 30, 2022 at 4:33 PM

Reply to comment by phatitt in Drop Alt "Air Gap" Mod by phatitt

It probably doesn't cost much to make a smoke or dark colored acrylic insert there...

pabloescobyte t1_iudxxiv wrote on October 30, 2022 at 4:32 PM

Reply to Me after waiting for a group buy by jckpxbk

Bones still there?

Dude I've been waiting so long I've long turned to dust. If I was in this photo it'd be invisible...

pabloescobyte t1_iudxq9k wrote on October 30, 2022 at 4:31 PM

Reply to When keyboard becomes more than just a keyboard by orangeosh

Never thought I'd be saying this but vomit caps look real good on this! Probably due to the retro look though.

How many bags did you need to buy to get enough to fill this out?

pabloescobyte t1_iuduxdf wrote on October 30, 2022 at 4:11 PM

Reply to Drop Alt "Air Gap" Mod by phatitt

Interesting mod to make to a CTRL. Did they not ever offer a non-diffused version of the case?

pabloescobyte t1_iu8zrv6 wrote on October 29, 2022 at 2:21 PM

Reply to Got that translucent look! by eliminatedalljuice

How do the caps feel in actual use? I'm not sure I could get used to the smoothness of the tops as I prefer textured tops.

pabloescobyte t1_iu8z9ff wrote on October 29, 2022 at 2:17 PM

Reply to Completed Odin V2 by overunderspace

A mighty fine looking Odin. Specs? Mods?

pabloescobyte t1_iu8z0to wrote on October 29, 2022 at 2:15 PM

Reply to My backlog after a 3/4 year hiatus from the hobby by Sith_ye

O_O wow I feel like a kid in a candy shop just looking at this photo!

And from your flare I'd probably bow in your presence too lol. Why the hiatus if I may ask?

pabloescobyte t1_iu6x358 wrote on October 29, 2022 at 12:37 AM

Reply to comment by szastamasta in Just some renders of wireless Planck clone I'm working on. It's not ready yet, but I just have finished the case and it looks so cool I just had to share it. by szastamasta

That's awesome! I look forward to seeing more on this thing.

Do you have a site that you're updating or are you planning on doing some sort of Interest Check soon?

pabloescobyte t1_iu6wykb wrote on October 29, 2022 at 12:36 AM

Reply to comment by NatureAndArtifice in Akko 40 percent in the works. Aside from QMK, what do you want to see on it? by NatureAndArtifice

Yeah I think you're right it's probably structural. And I agree the side bezels being smaller is much more critical though it would probably look nicer to me if the sides were bigger than the top...

pabloescobyte t1_iu67pdj wrote on October 28, 2022 at 9:18 PM

Reply to Just some renders of wireless Planck clone I'm working on. It's not ready yet, but I just have finished the case and it looks so cool I just had to share it. by szastamasta

Ooh you sir have caught my attention!

It looks like a metal case? Is it going to be plastic since wireless signals and metal don't mix too good...

I'd be interested in a wireless Preonic myself as I need the extra row above.

pabloescobyte t1_iu66z1m wrote on October 28, 2022 at 9:12 PM

Reply to comment by atflp in Moved over from GMMK Pro, think I’m done. by bryson-182

Move them elsewhere. I have my Home/End on CAPSLOCK+Q/E, PgUp/PgDn on CAPSLOCK+R/F for example. Ins/Del is CAPSLOCK+P/BACKSPACE.

Now your right hand can stay on your pointing device and you can move around freely. Helps to be using CAPSLOCK+WASD as your arrow keys as well.

pabloescobyte t1_iu66oe2 wrote on October 28, 2022 at 9:10 PM

Reply to Moved over from GMMK Pro, think I’m done. by bryson-182

Here, you dropped the words "For now" from your post.

pabloescobyte t1_iu65joy wrote on October 28, 2022 at 9:02 PM

Reply to Akko 40 percent in the works. Aside from QMK, what do you want to see on it? by NatureAndArtifice

I need to see some legs! Or at least the option to add some.

And of course QMK compatbility otherwise this is going to be a no-go because a 40% needs to be fully programmable to be a viable daily driver for anyone who wants to properly use one.

Also wish the top and bottom bezels weren't so big. No need for them to be...